Skip to Main Content

How Docs

UW-specific

Use Remote Desktop to Work on Your Office Computer Remotely (Windows XP)

Introduction

With Remote Desktop, you can connect to your work computer from home and access all of your programs, files, and network resources as though you were actually sitting in front of your computer at work.

This document is intended to assist you in using Remote Desktop within the UW network environment and is specific to the Windows XP operating system on both your office and remote computers.

Procedure

  1. Preparing Your Office Computer for a Remote Desktop Connection

    1. Click the Start menu button, right-click My Computer, and click Properties.

      NOTE: The My Computer icon may also be located on the Desktop.
       
    2. Select the Remote tab, and in the Remote Desktop section, select the Allow users to connect remotely to this computer check box.
       
    3. Select the Computer Name tab, and make a note of the full computer name, including the .uwyo.edu, as you will need it in order to connect to your computer remotely.
       
    4. Click OK.
       
  2. Establishing a Remote Desktop Session With Your Office Computer 

    NOTE: Your office computer must be turned on in order to connect to it remotely.

    1. On the remote computer, establish an Internet connection. Instructions will be specific to your Internet Service Provider (ISP).
       
    2. Establish a VPN connection through WyoSecure VPN at https://wyosecure.uwyo.edu. See the WyoSecure VPN FAQ for information on installing and using the UW WyoSecure VPN.

      NOTE: A VPN connection is not necessary if UW is your ISP (i.e. UW DSL or a UW Ethernet connection).
       
    3. On the remote computer, click the Start menu button, point to All Programs (or Programs), point to Accessories, point to Communications, and click Remote Desktop Connection.
       
    4. In the Remote Desktop Connection window, in the Computer box, enter the full name of your office computer, including the .uwyo.edu, and click Connect.
       
    5. In the Logon to Windows window, enter your UWYO domain username and password, verify that UWYO is listed in the Log on to box, and click OK.

      NOTE: If you use an account other than your UWYO domain username and password to log on to your computer when at work, log in with that information here as well. 
       
    6. Once logged in, you can begin using your work computer just as if you were in front of it in your office.

      NOTE: To return to your remote computer at any time while still maintaining the connection to your office computer, click the Minimize icon at the top of the screen. To return back to your work computer, click Computer Name - Remote Desktop in the taskbar at the bottom of the screen.
       
  3. Disconnecting a Remote Desktop Session With Your Office Computer

    1. To disconnect from your office computer, leaving it logged off, click the Start menu, click Log Off, and click Log Off again in the Log Off Windows window.
       
    2. To disconnect from your office computer, leaving it locked (i.e. leaving all open applications and files as they are), click the Close icon at the top of the screen, and click OK in the Disconnect Windows session window.
     

 

Reviewed: 0111 By: GG

Additional help with the installation and configuration of
UW-supported software is available:
Faculty/Staff
Contact the IT Help Desk at 766-HELP (4357), option 1
Email UserHelp@uwyo.edu
Contact your IT user consultant
(www.uwyo.edu/infotech/services/helpdesk/uc/)

Students
Email ASU-IT@uwyo.edu
Contact the IT Help Desk at 766-HELP (4357), option 1
Come to the student computer lab in the lobby of the
Information Technology Center.

Footer Navigation

University of Wyoming
 
1000 E. University Ave. Laramie, WY 82071 // UW Operators (307) 766-1121 // Contact Us