|
IECM 14.0 beta User Manual > Modules Included with the IECM > Low-Carbon Hydrogen Production & Transport > SET PARAMETERS > Syngas Cleanup > Water Gas Shift + MDEA > WGS Performance |
|
Inputs for configuring the performance of WGS reactors are entered on the WGS Performance parameter screen. All of the parameters on this screen are currently read-only. The following parameters are shown for reference:
•WGS Reactor 1:
•Outlet Temperature: This parameter defines the outlet stream temperature of WGS Reactor 1.
•Operating Pressure: This parameter defines the operating pressure of WGS Reactor 1.
•WGS Reactor 2:
•Outlet Temperature: This parameter defines the outlet stream temperature of WGS Reactor 2.
•Operating Pressure: This parameter defines the operating pressure of WGS Reactor 2.
•WGS Reactor 3
•Outlet Temperature: This parameter defines the outlet stream temperature of WGS Reactor 3.
•Operating Pressure: This parameter defines the operating pressure of WGS Reactor 3.
Copyright © 2022-2026 University of Wyoming. All rights reserved. Visit us at https://www.iecm-online.com/