IECM 12.0 beta User Manual > Modules Included with the IECM > Pulverized Coal (PC) Plant > CONFIGURE SESSION > Plant Design > Predefined Configurations > Oxyfuel Med S (<=1.5) |
|
The Oxyfuel Med S (<=1.5%) configuration is an Oxyfuel configuration for medium-sulfur coals. The oxyfuel system has some very specific configuration requirements that make it difficult to select in the menus directly. We recommend that you start with this configuration and make adjustments as needed:
•Coal/Biomass
•In-Furnace Controls (See In-Furnace Controls parameters and In-Furnace Controls results for more details.)
•Fabric Filter (See Fabric Filter parameters and Fabric Filter results for more details.)
•Lime Spray Dryer (See Spray Dryer parameters and Spray Dryer results for more details.)
•Oxyfuel Med S (0.5%-1.5%) (See FG Recycle & Purification parameters and FG Recycle & Purification results for more details.)
•Wet Cooling Tower (See Wet Cooling Tower or Wet Unit parameters and Wet Cooling Tower or Wet Unit results for more details.)
•Ash Pond (See By-Product Management parameters for more details.)
•No Mixing
Note: |
Although the fuel type is listed as Coal/Biomass, we do not recommend using biomass in an Oxyfuel plant. |
Copyright © 2023-2024 University of Wyoming. All rights reserved. Visit us at https://www.iecm-online.com/