IECM 12.0 beta User Manual > Modules Included with the IECM > Pulverized Coal (PC) Plant > SET PARAMETERS > SO2 Control > Wet FGD > Additives |
|
The following parameters are available on the Additives parameter screen:
•Chloride Removal Efficiency: Chlorides in the flue gas inlet stream are removed by the lime/limestone slurry. This parameter determines the amount of chlorides removed.
The following parameters are only shown when LS w/ Additives is chosen as the reagent on the Config screen:
•Dibasic Acid Concentration: Dibasic acid (DBA) is added to limestone to reduce the liquid to gas ratio, enhancing the removal of SO2. This is the concentration of DBA in the limestone slurry.
•Dibasic Acid Makeup: DBA is not completely recovered in the reagent feedback loop. This parameter is used to determine the makeup flow rate of DBA.
Copyright © 2023-2024 University of Wyoming. All rights reserved. Visit us at https://www.iecm-online.com/