IECM 12.0 beta User Manual > Modules Included with the IECM > Pulverized Coal (PC) Plant > SET PARAMETERS > CO2 Capture, Transport & Storage > 5. CO2 Storage > Geologic >

Reservoir

← Previous | Next →

The Reservoir parameter screen allows you to select the reservoir used for CO2 storage and edit its properties.

You may look up and/or save reservoirs in a database using the database button at the top of the screen. Or, if you prefer, you may enter or edit the properties directly on this screen.

The following information is displayed near the top of the screen to help identify the reservoir:

•Name: This is the name of the reservoir.

The remainder of the screen contains the reservoir properties:

•State: This is the state in which the reservoir is located.

•Reservoir Depth: This is the depth of the reservoir.

•Reservoir Thickness: This is the useable (net pay) thickness of the reservoir.

•Reservoir Horizontal Permeability: This is the horizontal permeability of the reservoir.

•Reservoir Porosity: This is the porosity of the reservoir.

•Storage Coefficient: This is the storage coefficient of the reservoir.

•Reservoir Surface Temperature: This is the temperature at the top of the reservoir.

•Geographical Area for CO2 Storage: This is the size of the geographical area that defines the reservoir.