IECM 12.0 beta User Manual > Modules Included with the IECM > Pulverized Coal (PC) Plant > SET PARAMETERS > CO2 Capture, Transport & Storage > 5. CO2 Storage > Geologic > Performance |
|
Inputs for the performance of the CO2 storage system are entered on the Performance parameter screen. The following parameters are provided:
•Performance Model: There are two models available: Law & Bachu, and Advanced Research Institute. Law & Bachu is the default.
•Project Average Injection Rate: This is the project average injection rate per year.
•Design Maximum Injection Rate: This is the maximum injection rate per well per year.
•Monitoring Well Density:
•Wells in Reservoir: This is the density of monitoring wells in the reservoir.
•Wells Above Seal: This is the density of monitoring wells above the seal.
•Wells that are Dual Completed: This is the density of dual completion monitoring wells.
•Wells Groundwater: This is the number of groundwater monitoring wells.
•Wells Vadose Zone: This is the number of monitoring wells in the vadose zone.
•Dual Completed Wells in Reservoir: This is the percentage of dual completion wells in the reser voir.
•Margins:
•AOR Margin 3D: This is the 3D allowable operating region (AOR) margin for the reservoir.
Copyright © 2023-2024 University of Wyoming. All rights reserved. Visit us at https://www.iecm-online.com/