IECM 12.0 beta User Manual > Modules Included with the IECM > Integrated Gasification Combined Cycle (IGCC) Plant > SET PARAMETERS > Gasifier Area > GE > Performance |
|
Inputs for the performance of the GE gasifier are entered on the Performance parameter screen. The following parameters are displayed:
•Gasifier Area:
•Gasifier Temperature: This is the temperature of the syngas exiting GE Entrained-Flow Reactor. You may choose from the following values:
•2350°F
•2450°F (this is the default)
•2550°F
•Gasifier Pressure: This is the pressure of the syngas exiting GE Entrained-Flow Reactor. This value is provided for reference only.
•Total Water or Steam Input: This is the ratio of water to carbon in the coal slurry.
•Oxygen Input from ASU: The GE gasifier requires a constant value for the oxygen (O2) in the oxidant to carbon (C) in coal ratio. This value is provided for reference only.
•Total Carbon in Slag: This the percent of carbon in the fuel that is lost in the slag. You may choose from the following options:
•1
•3 (this is the default)
•5
•Sulfur Loss to Solids: This is the percent of the sulfur in coal that is lost in the slag.
•Coal Ash in Raw Syngas: This is the percent of ash in the coal that is in the syngas.
•Percent Water in Slag Sluice: This is the percent of the slag sluice that is water.
•Number of Operating Trains: This is the total number of operating trains. It is used primarily to calculate capital costs. The value must be an integer.
•Number of Spare Trains: This is the total number of spare trains. It is used primarily to calculate capital costs. The value must be an integer.
•Raw Gas Cleanup Area:
•Particulate Removal Efficiency: This is the percentage of the ash which is removed by the raw gas cleanup process.
•Power Requirement: This is the equivalent electrical output of thermal (steam) energy used for reheat, plus the actual electrical output power required.
Copyright © 2023-2024 University of Wyoming. All rights reserved. Visit us at https://www.iecm-online.com/