IECM 12.0 beta User Manual > Using the IECM > Setting Parameters > Parameter Screens > Uncertainty Editor > #6: Normalized Distribution Parameters |
|
The Normalized Distribution Parameters are located beneath the nominal minimum and maximum:
The Uncertainty Editor: Normalized Distribution Parameters
The exact parameters that appear here depend on the distribution you have chosen. In this case, we're using a uniform distribution, which has minimum and maximum values as its parameters. If the Use Nominal Values checkbox is not checked, this is where you will enter the parameters for your distribution. Otherwise, the normalized values will be calculated from the nominal values you have entered, if possible, and shown for your reference. (If the deterministic value is zero, the normalized value cannot be calculated.)
The normalized and nominal distribution parameters are replaced with a 2-column table when a User-defined distribution is used.
Copyright © 2023-2024 University of Wyoming. All rights reserved. Visit us at https://www.iecm-online.com/