Publications

Journal Publications

  • Z. Chen, X. Zhang . Modeling of through-thickness FP and VaSC: impact of sacrificial fiber configurations.Composite Science and Technology, 247:110394, 2023. DOI:j.compscitech.2023.110394
  • P. Centellas, M. Gard, Z. Chen, X. Zhang , N. Parikh, P. Geubelle, N. Sottos. Energy-efficient manufacturing of multifuncnioal vasculariazed composites.Journal of Composite Materials, 57:581-592, 2022. DOI:10.1177/0021998322114235
  • Z. Chen, M. Ziaee, M. Yourdkhani, X. Zhang . Multiphysics Modeling of Frontal Polymerization-Assisted Layer-by-Layer Additive Manufacturing of Thermoset Polymer Components.Additive Manufacturing, 59:103182, 2022. DOI:10.1016/j.addma.2022.103182
  • Y. Liu, X. Zhang and C. Oskay. A Comparative Study on Fatigue Crack Initiation Parameters for Near Alpha Titanium Alloys.Fatigue & Fracture of Engineering Materials and Structures, 46:271-294, 2022. DOI:10.1016/j.cma.2022.115388
  • D. BrandyBerry, P. Geubelle and X. Zhang . Multiscale Design of Nonlinear Materials Using Reduced-Order Modeling.Computer Methods in Applied Mechanics and Engineering, 399:115338, 2022. DOI:10.1111/ffe.13862
  • J. Aw, X. Zhang A. Nelson, L. Dean, M. Yourdkhani, R. Ewoldt, P. Geubelle, N. Sottos. Self-Regulative Direct Ink Writing of Frontally Polymerizing Thermoset Polymers.Advanced Materials , 2200230, 2022. DOI: 10.1002/admt.202200230
  • M. Garg, A. Ladd, J. Aw, X. Zhang and N. Sottos. Sacrificial Cyclic Poly(phthalaldehyde) Templates for Low-Temperature Vascularization of Polymer Matrices.ACS Applied Polymer Materials, 4:479-487, 2022. DOI:10.1021/acsapm.1c01372
  • D. Xia, X. Zhang and C. Oskay. Large-deformation reduced order homogenizationpolycrystalline materials.Computer Methods Applied Mechanical Engineering, 387:114119, 2021. DOI:110.1016/j.cma.2021.114119
  • X. Zhang , Y. Liu and C. Oskay. Multiscale reduced-order modeling of a titanium skin panel subjected to thermo-mechanical loading.AIAA Journal, 60:302-315, 2021. DOI:10.2514/1.J060497
  • C. Zhao, S. Tanweer, J. Li, M. Lin, X. Zhang and Y. Liu. Nonlinear guided wave tomography for detection and evaluation of early-life material degradation in plates.Sensors, 21:16, 2021. DOI:10.3390/s21165498
  • D. brandyberry, X. Zhang and P.H. Geubelle. A GFEM-based reduced-order homogenization model for heterogeneous materials under volumetric and interfacial damage.Computer Methods Applied Mechanical Engineering, 377:113690, 2021. DOI:10.1016/j.cma.2021.113690
  • M. Garg, J. E. Aw, X. Zhang , P. Centellas, L. Dean, E. Lloyd, I. Robertson, Y. Liu, M. Yourdkhani, J. Moore, P. Geubelle and N. Sottos. Rapid synchronized fabrication of vascularized thermosets and composites.Nature Communications, 12:1-9, 2021. DOI:10.1038/s41467-021-23054-7
  • S. Vyas, X. Zhang , E. Goli, and P.H. Geubelle. Frontal vs. bulk polymerization of fiber-reinforced polymer-matrix composites.Composite Science and Technology, 198:108303, 2020. DOI:10.1016/j.compscitech.2020.108303
  • Y. Liu, X. Zhang, Y. Zhu, P. Hu and C. Oskay. Dislocation density informed eigenstrain based reduced order homogenization modeling: verification and application on a titanium alloy structure subjected to cyclic loading. Modeling and Simulation in Materials Science and Engineering. DOI:https://doi.org/10.1088/1361-651X/ab602e
  • S. Vyas, E. Goli, X. Zhang and P.H. Geubelle. Manufacturing of unidirectional glass-fiber-reinforced composites via frontal polymerization: A numerical study.Composite Science and Technology, 184:107832, 2019. DOI:https://doi.org/10.1016/j.compscitech.2019.107832
  • X. Zhang, D. Brandyberry and P. Geubelle. IGFEM-based shape sensitivity analysis of the transverse failure of a composite laminate. Computational Mechanics, 64:1455-1472. DOI:https://doi.org/10.1007/s00466-019-01726-y
  • J.T. Benzing, Y. Liu, X. Zhang, W.E. Luecke, D. Ponge, A. Dutta, C. Oskay, D. Raabe and J.E. Wittig. Experimental and numerical study of multi-phase medium-Mn TWIP-TRIP steel: influences of strain rate and phase constituents. Acta Materialia, 177:250-262, 2019. DOI:https://doi.org/10.1016/j.actamat.2019.07.036
  • X. Zhang and C. Oskay. Sparse and scalable eigenstrain-based reduced order homogenization models for polycrystal plasticity. Computer Methods Applied Mechanical Engineering, 326:241-269, 2017. DOI:https://doi.org/10.1016/j.cma.2017.07.027
  • V. T. Phan, X. Zhang, Y. Li and C. Oskay. Microscale modeling of creep deformation and rupture in Alloy 617 at high temperature. Mechanics of Materials, 114:215-227, 2017. DOI:https://doi.org/10.1016/j.mechmat.2017.08.008
  • X. Zhang, C. Oskay. Polycrystal plasticity modeling of Nickel-based superalloy IN 617 subjected to cyclic loading at high temperature. Modeling and Simulation in Materials Science and Engineering, 24:055009, 2016. DOI:https://doi.org/10.1088/0965-0393/24/5/055009
  • X. Zhang and C. Oskay. Eigenstrain-based reduced order homogenization for polycrystalline materials. Computer Methods in Applied Mechanics and Engineering, 297:408-436, 2015. DOI:https://doi.org/10.1016/j.cma.2015.09.006
  • D.Y. Hu and X. Zhang. Full-scale crash test and FEM simulation of a crashworthy helicopter seat. Journal of Aerospace Power, 27:395-400, 2012. DOI:https://doi.org/10.13224/j.cnki.jasp.2012.02.025

 

Book Chapters

  • S. Zacek, D. Brandyberry, A. Klepacki, C. Montgomery, M. Shakiba, M. Rossol, A. Najafi, X. Zhang, N. Sottos, P. Geubelle, C. Przybyla, G. Jefferson. Transverse failure of unidirectional composites: sensitivity to interfacial properties.Integrated Computational Materials Engineering (ICME). DOI:https://doi.org/10.1007/978-3-030-40562-5_15.

 

Conference Publications

  • M. Lin, D. Brandyberry and X. Zhang. An Adaptive Clustering-Based Reduced-Order Modeling Homogenization Method for Composites Materials. AIAA Scitech 2023 Forum, National Harbor, MD, January 23-27, 2023.
  • Z. Chen, M. Ziaee, M. Yourdkhani and X. Zhang. Coupled Thermo-Chemical Modeling of Frontal Polymerization-Assisted Additive Manufacturing of Thermoset Polymer Components. AIAA Scitech 2023 Forum, National Harbor, MD, January 23-27, 2023.
  • M. Lin, Y. Liu, C. Oskay and X. Zhang. Toward Microstructure-Informed Reduced-Order Modeling of Fatigue Initiation in a Titanium Skin Panel Subjected to Thermo-Mechanical Loading. AIAA Scitech 2023 Forum, San Diego, CA, January 3-7, 2022.
  • E. Goli, N. Parikh, S. Vyas, X. Zhang, N. Sottos, J. Moore and P. Geubelle. Manufacturing of carbonand glass-fiber composites using frontal polymerization. International Conference on Composite Materials, Melbourne, Australia, August 11-16, 2019.
  • X. Zhang, Y. Liu and C. Oskay. Coupling crystal plasticity with structural mechanics for prediction of thermo-mechanical response in large scale structures. 6th European Conference on Computational Mechanic, Glasgow, UK, June 11-15, 2018.
  • X. Zhang and C. Oskay. Eigenstrain-based reduced order homogenization models for polycrystal plasticity: addressing scalability. XIV International Conference of Computational Plasticity. Fundamentals and Applications, Barcelona, Spain, September 5-7, 2017.
  • X. Zhang, V. T. Phan and C. Oskay. Microstructural creep, fatigue and creep-fatigue modeling of Nickel-based superalloy Inconel 617 at high temperature. Proceedings of the High Temperature Reactor Technology (HTR) Meeting 2016, Las Vegas, NV, November 7-10, 2016.